MIDWEST FASTENERS
GENERAL SPECIFICATIONS

Standard in low carbon steel, 302/304/305 stainless, and 1100, 6061, and 5000 series aluminum. Brass and other grades of stainless steel are also available.

Standard in low carbon steel and 302/304/305 stainless. Aluminum, monel, inconel, and other grades of stainless steel are available.

Copper plating is standard. Cadmium, nickel, zinc, and other platings are available.

Cadmium to ASTM-A 165 type TS, zinc to ASTM-B 633 (formerly A 164) and other platings are available. Non-weldable plating is removed from the weld end to avoid contamination of the weld.

All low carbon steel and stainless steel studs are annealed where required.

Low carbon steel can be annealed to a maximum of 75 Rockwell B and stainless steel to a maxi­mum of 90 Rockwell B.

UNC-2A is standard for external threads prior to plating and UNC-2B for internal threads. For metric and other thread sizes contact the MIDWEST FASTENERS Customer Service Department.

Flanged, small-flanged, and non-flanges are available

1/4" dia. and over have solid flux. Diameters under 1/4" are standard pointed, and flux is optional.

CD studs have no appreciable length reduction after welding.

MIDWEST FASTENERS arc stud length desig­nations are BEFORE WELD; AFTERWELD lengths are shown in the table below

Does not apply to CD

All orders include ferrules when they are required