800.852.8352
Midwest Fasteners, Inc.
450 Richard St.
Miamisburg, OH 45342
|
|
CD 100
CAPACITOR DISCHARGE
STUD WELDER
|
 |
The CD 100 Capacitor Discharge
Stud Welded from Midwest Fasteners is one of the most powerful units on the market
today. With solid state design, the CD 100 is perfectly matched to heavy-duty
industrial fastening for welding larger diameter CD studs.
Not only can be CD 100 weld materials such as mild steel, stainless steel, aluminum
and brass- the unit is also capable of welding stud up to 3/8* diameter weld
base. Due to the speedy capacitor discharge process, studs can be welded to material
as thin as 020" gauge without burning through.
The CD 100 comes equipped with a high/low power range switch that is helpful
in welding small and large diameter fasteners. This variable capacitance switch
allows the operator to fine tune critical applications from 84.000 to 1,68, 000.MFD.
Anchor unique feature of the CD 100 is the leo panel meter, which displays capacitor
discharge voltage at a glance
|
Solid state circuitry and rugged steel
chassis assure durability and long service life. What's more the
unit is loaded with safely features. Circuit breaker protection
prevents expensive repair to component part, such as printed circuit
board.The recessed control panel protects gauges and control knocks.
And the auto fault shut off aids in operator safety
An ultra-light 24 ounce 'precision Contact Gun" in included with the
CD 100 welding system. With this gun, operator fatigue is reduced -
thereby increasing production. The CD 100 contact gun also includes
interchangeable main spring pressure that is necessary for many special
welding application, and critical in welding aluminum fasteners and
dissimilar materials.
The CD 100 Available only from Midwest Fasteners - your complete source
for stud welded fasteners CD stud welding systems. |
CD 100
CAPACITOR DISCHARGE
WELDING SYSTEM |
 |
SPECIFICATION |
POWER |
| SUPPLY / CONTROLLER |
| Height |
9" |
| Width |
13-1/2" |
| Depth |
21" |
| Weight |
66 Pounds |
| Capacitance |
Low - 84,000 mfd |
| |
High - 168,000 mfd |
| Weld Rate |
up to 14/min. |
Weldable
Material |
Mild Steel,
Stainless Steel |
| |
Aluminum |
| Pin/Stud Range |
14 GA, thru
3/8' Dia. weld base. |
| Weld Voltage |
35-175 VDC |
| Weld Mode |
Contact |
| Power Requirement |
115VAC, 60
Hz, 30 AMP |
|
WELD GUN |
(CD - 2P PRECISION) |
| |
| Weight |
1-1/2 Lbs.(Not including cable) |
| Size (LWH) |
6-1/2' x 2" x 5-3/4" |
| Weldable Dia |
1/4 Gauge through 3/8" Dia. |
| Materials |
High strength,impact
resistance,
Polycarbonate |
| |
| CABLES |
| Ground cable |
# 1x15ft.(two each) |
Gun Extension
Set |
# 1x18/2 x 35ft.
(direct to gun) |
|
|
|
|
Please fill in the form below to receive a prompt quote or call 800-852-8352.
|
