800.852.8352
Midwest Fasteners, Inc.
450 Richard St.
Miamisburg, OH 45342
|
| |
|
IMPORTANT NOTICE TO PURCHASER |
All statements, technical infonnation and recommendations contained
herein are based on facts we believe to be
reliable, but the accuracy or completeness thereof is not guaranteed,
and the following is made in lieu of all warranties, express or implied.
Seller's and manufacturer's only obligation shall be to replace such
quantity of the product proved to be defective. Neither seller nor
manufacturer shall be liable for any injury, loss or damage, direct
or consequential, arising out of the use of or the inability to use
the product.
Before using, user shall determine the suitability of the product
for his intended use and user assumes all risk and liability whatsoever
in connection therewith.
No statement or recommendation not contained herein shall have any
force or effect unless in an agreement signed by officers of seller
and manufacturer.
|
GUIDELINES FOR SELF STICK INSUL-ANCHORS |
- Must be applied to a clean, non-porous surface, that is free of all
oil, film, dust, rust, etc.
- Not generally recommended on painted surfaces, drywall, nor ceilings
of metal buildings.
- Best results are obtained when arnbient temperature is above 40 degrees
F. at time of application.
- Temperature range for the foarn tape is from -20 degrees to 180 degrees
F.
- Loading should not exceed 3 lbs per anchor (.75 lb/sq. inch).
- Base must be appliec with firm pressure. Do not twist during application.Do
not remove release (backing ) paper until ready to use.
- Insulation may be applied immediately after bond is made.
|
|
|
|
|
|
Please fill in the form below to receive a prompt quote or call 800-852-8352.
|
